25ltr 3.0kw Cistern Combination Water Heater - h 880 w 452 d 215 mm

- Ideal where a number of hot water outlets are needed; such as kitchens; washrooms; schools restaurants; or offices. - ‘Twin stat’ temperature control for excellent safety; allowing the first thermostat to be set to the required temperature and the second to be set to a cut -out temperature 15.C above the first. Second ‘safety’ thermostat is also manually re -settable. - Polyurethane foam injected insulation for minimal heat loss. - Built -in feed cisterns for easy installation. Minimum height of the hot water draw -off point is 1.25m below the top edge of the unit. - Steel case for durability. - Pre -drilled cistern inlets for left or right -hand supply. - Bylaw 30 compliant. RATING Kw 3 CAPACITY litres 25 WEIGHT EMPTY/FULL Kg 15/45 ELEMENT: Copper on heater plate assembly INNER CONTAINER: All copper construction/WRC approved GRP cistern. CASING: Anti -corrosion proofed powder coated steel. INSULATION: Injected polyurethane foam. THERMOSTAT: Variable thermostat with variable manual reset thermostat. BASINS 2/3 SINKS/COMMERCIAL 0 STORED TEMPERATURE: 71°C 24 hour supply Warranty: 2 years . Important Note: Type of use can vary capacity required – please consult HSD if in doubt.