Af1250 Direct 250l Aquaflo Unvented S/s Cylinder

AF1250 250L Aquaflo Unvneted S/S cylinder; Direct 2 x 3kW Electric elements and unvented kit Actual Capacity: 238 ltr Dimensions mm: 1305H x 580 Dia Thermostat Adjustable; 45°C - 75°C Thermal cut -out: Manually resettable; set to 85°C Water vessel: Stainless steel tested to 16 bar Insulation: High performance CFC free injected foam insulation Controls: Pressure reducing valve and line strainer set to 3.5 bar Expansion relief and non -return valve set to 6 bar Pressure and temperature relief valve set to 7 bar and 90° External expansion vessel pre -charged to 3.5 bar Expansion capacity: 24.0 litre for 250 litre models Approvals: WRAS approved and CE endorsed; LVD; EMC England Wales - The Building Regulations 2000 G3 and Part L. Scotland - Technical Standards P3 Northern Ireland - Regulation P5 Installation: When deciding the final location of the heater; consideration should be given to the safe and visible disposal of any water resulting from leaks or seepage. This is particularly relevant when the heater is located in a roof space; cupboard or any concealed location Plumbing: Must be installed by a competent installer in accordance with Local Regulations. For floor standing only Electrical: To be wired to a double pole fused spur; minimum break rating of 13 amps Installation must comply with current IEE regulations Caution: Variable temperature water heaters should be set only in strict compliance with regulations governing the temperature of stored and dispensed hot water Warranty: Ten -years on tank; Two -years on parts