Bullet Points: 1Turn Signal Flasher Relay - The electronic turn signal flasher relay will fix LED-related turn signals indicator issues, such as a super-flickering, no-flickering, or bulb-off warning message on the dashboard lights, or just be used to replace. 2Direct Replacement - The LED flasher relay can eliminate the use of load resistors and directly replace OEM 2-pin flasher relays, using LEDs or traditional bulbs to work at normal flash rates. 3Speed Adjustable - The speed of the LED turn signal flasher relay is adjustable. Use a flat-blade screwdriver to adjust the bottom knob and to set its flash rate from 50 to 200 times per minute. Clockwise is to decrease speed and counterclockwise is to increase speed. 4Compatible with - The LED flasher relay is compatible with most motorcycles. Easily plug in and easily use it. And it has 3 frequencies, counterclockwise for faster and clockwise for slower flash rate. 5Advanced - Adopting advanced chip technology, the electronic turn signal flasher relay has short circuit automatic protection, overload automatic protection, and reverse connection automatic protection, which can make the light bulb work more stably. Description: Electronic Turn Signal Flasher Relay - The electronic turn signal flasher relay is very helpful. It can be used to fix LED-related turn signals indicator issues, such as a super-flickering, no-flickering, or bulb-off warning message on the dashboard lights, and can be used as a replacement. installation tips: 1. When installing, be sure to align the pins correctly, the function of the flasher cannot be realized if the pins are installed wrongly. 2. If you change the flasher and the four lights come on together, you need to unplug the steering indicator of the dashboard. 3. B pin is input, L pin is output 4. B is connected to the positive pole of the power supply, L is connected to the positive pole of the lamp, and the negative pole of the lamp is grounded. Specifications: Name: Electronic Turn Signal Flasher Relay Size: about 3.5x3.5x2.7cm / 1.38*1.38*1.06 inch Voltage: 12V Working voltage: 11V-15V Switching Current: Min. 0.05A Switching Load: Min. 0.6W Flashing frequency: 50 to 200 times per minute Operating temperature: -40C to 80C Features: Direct Replacement Speed Adjustable Adopting advanced chip technology Package List: Electronic Turn Signal Flasher Relay *1 _x000D_