1. The substrate uses superconducting aluminum as the substrate, which breaks the conventional mode of using alumina ceramic substrates. It is helpful Compatible With welding during the installation process, so that it can be in close contact with the radiator and cooler at zero distance.2. The device uses innovative zinc telluride as raw material, which perfectly replaces the mainstream of bismuth telluride as raw material with its excellent material figure of merit. This innovation increases the overall temperature difference of the device by 3.5, and the cooling rate is higher than the original device. 10S shortened3. The thickness of the device is 5.7mm, and the thickness of the ordinary device is usually between 3-4mm. The size of the PN junction unit of the device is changed from the original 1.4x1.4x1.5mm to 1.4x1.4x2mm, which helps to increase the cooling effect. The distance between the hot-terminal reduces the influence of the heat release of the hot end on the cooling of the cold side4. The service life is over 40WH, and the device has undergone the following rigorous tests to make the storm more violent: Polarity switching test: This test mainly investigates the influence of thermal stress on the life of the refrigerator.5. Test method: 20~80, 5 minutes of Compatible Withward current and 5 minutes of reverse current is a cycle. High temperature storage test: This test mainly investigates the influence of the diffusion of harmful elements on the life of the refrigerator. Test method: The company now conducts two high-temperature storage tests at 90 and 150.Low temperature storage test: This test mainly investigates the low temperature characteristics of various materials in the refrigerator.Test method: The company is now conducting -40 low temperature storage test.Temperature shock test: This test mainly investigates the influence of thermal stress on the life of the refrigerator.Test method: 70 (30 min) / -55 (30 min), conversion time 1 min, 5 cyclesImpact test: This test mainly examines the ability of the refrigerator to withstand external impact.Wire specifications: lead length 150 +/- 5mm, RV standard wire, single end 5mm tinnedInternal resistance: 2.0~2.2 ohm (ambient temperature 23 +/- 1, 1kHZ Ac test)Maximum temperature difference: Tmax(Qc:0) above 66.Working current: Imax 6ARated voltage: DC12V (Vmax: 15.4V)Cooling power: Qcmax 60WAssembly pressure: 85N/square centimeterWorking environment: temperature range -55~83 (excessive ambient temperature will directly affect cooling efficiency)Encapsulation process: standard 704 silicone rubber seal aroundStorage conditions: -40~60Single weight: 23gcolour: blackMaterial: ABSSize: 40x40x5.7mm Package Contents:1 x Cooling sheetOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.