Applications: Vehicle adjustable power supply; connect 12V input, and the output can be adjusted between 14V and 35V (vehicle adjustable supply). Note that the output voltage cannot be lower than the input voltage. Boost charger: Use a 12V input to charge batteries with voltages higher than 12V, such as a 24V battery. Power electronic devices by setting the required output voltage, provided the current does not exceed the rated limit. Ideal for system-level power needs. For example, when working on a project requiring an input of 10–18V and your system board needs approximately 24V, this module provides a reliable solution. It supports direct operation without additional debugging, enabling efficient voltage boosting. Input voltage: DC 10–32V Output voltage: DC 12–35V (adjustable) Output current: up to 6A maximum Input current: up to 10A maximum Maximum output power: 100W (natural cooling), 150W (with active cooling) Conversion efficiency: up to 94% (tested at 19V input, 2.5A, with 16V output; reference value) Output ripple: ≤2% maximum Operating temperature: Industrial grade (-40°C to +85°C); derate above 40°C ambient or improve cooling Full charge temperature: Up to 45°C No-load current: 25mA typical Voltage regulation: ±0.5% Load regulation: ±0.5% Dynamic response speed: 200μS within ±5% Short circuit protection: Not equipped; no internal fuse or protection circuit on input side Input reverse polarity protection: Not included; user must implement external protection or diode on input connections Dimensions: 65 x 23 x 56.3mm Color: As shown in images Material: PC + metal Package Contents: 2 x DC-DC Converter Modules Note: The package includes only the items listed above. Other accessories are not included. Due to lighting effects and monitor settings, the actual color of the item may vary slightly from the image. Permissible measurement deviation: ±1–3cm.