Item Type: Soda Hose Material: Stainless Steel + Aluminum Alloy Color: Black Length: Approx.1m/3.3ft Weight: Approx.284g/10oz Test Pressure (TP): 17000psi Working Pressure (WP): 6000psi Interface Diameter: 21.8mm/0.86in Thread Interface: W21.8-14 // TR21-4 Applicable Countries: South Korea, Japan, Britain, Germany, France, Poland, Norway, Switzerland, Russia, Ukraine, South Africa, Sweden, Chile, Czech Republic, Singapore... (some countries are also called DIN477 /JIS m22-14) How to Use: 1. Screw the pin valve into the Soda machine 2. Screw the nut onto the carbon dioxide cylinder and tighten it with a wrench 3. Connect the quick connector 4. Open the valve of the gas cylinder 5. After completion, you can use the Soda machine. If you want to unscrew items from the machine: 1. Close the atmospheric cylinder valve 2. Press the button of the Soda machine to discharge the remaining carbon dioxide (if you do not disconnect the connector according to this guide, the o-ring of the quick connector will blow off) 3. Disconnect the quick connector 4. Unscrew the pin valve on the Soda machine and unscrew the nut on the CO2 cylinder 1、1 meter hose, working pressure is 6000psi, very soft, not easy to fold break, is a very practical accessories. 2、Works most for soda machines and allows normal operation without any complex changes. 3、Light weight and easy to install, the old or damaged parts can be directly replaced. 4、Applicable countries are South Korea, Japan, Britain, Germany, France, Poland, Norway, Switzerland, Russia, Ukraine, South Africa, Sweden, Chile, Czech Republic, Singapore. 5、Good sealing performance, no air leakage when connected with the cylinder, more convenient to use. 1 x Soda Hose 1 x Instruction Manual 2 x Spacer 1 x Gasket