1pc 5-Zone Central Heating Controller for Floor Hot Water System

Features: CCT-25 is a multi-zone central heating system intelligent hub controller, a 5-channel concentrator with indicator.<br> The thermostat corresponds to the valve, which is indirectly connected to the actuator. Up to 3 NC actuators can be connected to 1 zone.<br> In a heating system, the actuator opens and closes the valve according to the thermostat setting.<br> Each thermostat controls the heating independently to heat different areas.<br> The intelligent multi-zone central heating system controller is a 5-channel thermostat controller with indicator light.<br> This unit is used to centrally process floor heating or thermostat signals, transmit instructions to control the opening or closing of floor heating electric valves, and realize zone control.<br> While controlling the electric actuator, the passive connection of the heat pump host, boiler, and external water pump (mixing center) can be controlled.<br> Specifications:<br> Part name: Heating controller<br> Size: 177 x 110mm<br> Power supply: 100-240VAC, 50/60Hz 10A<br> Passive output (boiler): 8A<br> Circulation pump output: 250VAC, 8 (5) A<br> No electrical connection: 1 normally open (common terminal)<br> Number of circuits: 5 loops. Maximum number of actuators in a loop: 3. Exit delay: 200S.<br> Thermostats correspond to zone valves, which are indirectly connected to actuators. Up to 3 NC actuators can be connected to 1 zone.<br> CCT-25: 5 temperature controllers can be connected. 1 thermostat corresponds to 1 zone valve, and up to 3 NC actuators can be connected to 1 zone.<br> Material: Plastic<br> Color: As shown<br> Due to different product batches, the appearance may vary slightly, but it does not affect the use.<br> Package Contents:<br> 1 x Heating Controller<br> Only the above package content is included; other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The measurement allowed error is +/- 1-3cm.