<p>Standard: SD specification VER2.0, IDE \/ -33</p> <p>Standard IDE interface: true ide mode, and supports dma-33 transmission mode; IDE interface is 44 pin \/ 2.0mm male connector; There are two main control chips on board and an SD card socket on back</p> <p>Advantages: small occupation area, delicate design, simple operation; SD card can be a device that contains OS and application software and can be started directly; Support DMA and ultra DMA mode applicable to DOS, NT4, windows98se, me, 2000, XP, vista, , Linux systems</p> <p>Installation instructions: First install SD card into slot, then connect data cable of hard disk to interface of notebook hard disk. After power on test is normal, it can be operated and used. It's so simple, no need to drive any more</p> <p>Note: for soft routing, SD card size within 1g is enough. If Win98, win me, WINXP and system are installed, SD card capacity is better to use more than 2GB. If you need high speed, please choose high multiple flash card... Otherwise, it is OK.</p> <p>Support: up to 128G SD card</p> <p>Type: IDE Cables</p> <p>Model Number: sd to ide adapter</p> <p>colour:Black</p> <p>Material:PCB+metal</p> <p>Package Contents:</p> <p>2 x SD to 2.5 IDE 44-pin adapter card</p> <p>Only above package content, other products are not included.</p> <p>Note: Light and different displays may cause color of item in picture a little different from real thing. The measurement allowed error is +\/- 1-3cm.</p>