Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to provide illumination in dark areas PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected to help prolong battery life. Activates only in dark conditions when motion is detected Easy Installation - No hard-wiring required. Equipped with double-sided adhesive pads and built-in magnet for flexible mounting options Battery Operated - Powered by 3PCS AAA batteries (not included), designed for use in areas without access to electricity Note: This light activates only in darkness. It will not turn on if sufficient ambient light is detected. Do not install in high temperature locations, as heat may weaken the adhesive and cause the unit to detach Specifications: 1.5v, 0.3w Sensitivity: 3 meter Distance Sensor Range: 120 degrees Operating temp: -20C-40C LED Qty: 6 LED Light color: Warm White LED life: 50,000 hours or more Mounting: Tape or Magnet Product Diameter: 3.15 in Thickness: 0.87 in Additional Notes: 1. Ensure batteries are installed in the correct direction 2. Unit only operates in dark environments 3. Performance may vary when switching from alkaline to zinc-manganese batteries due to size differences 4. Infrared heaters may temporarily interfere with sensor operation; normal function resumes approximately 30 minutes after heater is turned off 5. Clean and dry mounting surface thoroughly to ensure strong adhesion of the double-sided tape Package includes: 3 x Motion Sensor LED Night Light 3 x Double-sided adhesive pads 1 x User Manual