1、Built‑in motion PIR sensor, when a human body is detected within the range, it will light up immediately, and will be automatically delayed off after the person leaves. 2、Equipped with 20pcs LED lamp chips, with sufficient brightness and low power consumption, it is suitable for night lighting. 3、120° sensing angle, the sensing distance is greater than 9.8ft, sensing methods: normally on + human body infrared induction. 4、Easy to install and remove, and can be pasted on the surface of any non‑iron items using the provided double‑sided tape. 5、Suitable for lighting of stairs, drawers, kitchens, bedrooms, wardrobes, workshops, bookshelves, attics, closets, basements, corridors, headboards, tree trunks, etc. 1 x Motion Sensor Light1 x USB Cable1 x English Manual Item Type: Motion Sensor LightMaterial: Aluminum + PCWeight: Approx. 109g/ 3.8ozSize: Approx. 185 x 30 x 17mm/ 7.3 x 1.2 x 0.7inBattery Type: A-Class Lithium Battery (Built-In)Battery Model: 18650Nominal Battery Capacity: 800mAhCharge And Discharge Times: More than 500 timesLife Time: 60 days (induction mode)Charging Voltage: 5VNumber of LED Lamp Beads: 20pcsSensing Distance: Greater than 3 meter/ 9.8ftSensing Angle: 120°Induction Method: Normally on+ Human Body Infrared InductionInduction Mode: I: power on/normally on, II: human body induction mode + light sensor, III: power off (press the switch for a short time)Dimming Mode: I: turn on/always on, II: long press for 3 seconds to switch colors, III: short press for induction mode, IIII: off