Condition: 100% Brand New <br>Item Type: Tile Leveler <br>Material: PP, Stainless Steel <br>Weight: Approx. 406g / 14.3oz <br>Size: <br>Tile Leveler Length: 7.3cm / 2.9in (With Steel Needle) <br>Steel Needle: 1.8x0.08cm / 0.71x0.03in<br>1、This product can be used to test whether the tiles are flat, so that the tiles are balanced at the same level. <br>2、Made of high quality material, it is durable, wear-resistant, easy to DIY operation. <br>3、It can effectively improve the installation speed of ceramic tiles and reduce the fatigue and pressure of installation personnel. <br>4、It reduces the need of grinding and polishing, and prevents the tiles from moving during curing. <br>5、Simple and convenient use, reusable use, and is a very practical construction tool.1. When tiling, the brick joint shall be kept between 2-6mm. <br>2. Remove the setting of adjustment period to insert the thickness of ceramic tile, insert T-shaped metal needle along the brick joint, and then rotate 180° to clamp on the bottom of two bricks. <br>3. Use hand or special wrench to screw the adjusting cover to extrude the tiles downward, so as to make the horizontal surfaces of the two tiles consistent. <br>4. After 5 hours of construction paving, when the cement and ceramic tile adhesive are not completely dry, loosen the adjusting cover in the opposite direction and rotate the T-shaped needle 180 ° again to draw out along the crack. <br>5. Before tightening, it is recommended to turn the T-shaped needle left and right for several turns so that the surrounding cement or tile glue can open some space for the regulator to take out more easily.<div>25 x Tile Leveler</div><div>25 x Steel Needle</div><div>1 x Wrench</div><div>25 x T-Shape Plastic Fitting</div>