Item Type: AC Current Transmitter <br>Material: ABS <br>Power Supply: DC24V <br>Installation Method: Standard rail + flat screw fixation <br>Product Use: Used to measure AC current, especially for power frequency 50Hz sine wave AC current <br>Rated Current: AC0-100A <br>Rated Output: DC4-20mA <br>Load Capacity: Voltage Output: 5mA; Current Output: 6V <br>Accuracy: 0.5% <br>Overload Capacity: 30 Times the nominal input <br>Isolation withstand Voltage: 3KV/50Hz, 1Min <br>Offset Voltage: ≤10mV <br>Temperature Drift: ≤500PPM/℃ <br>Linearity: 0.1% <br>Frequency Bandwidth: 20-5KHz <br>Current Consumption: <15mA+ output current <br>Response Time: <200ms <br>Working Temperature: -109℃~+70℃ <br>Storage Temperature: 25℃~85℃<br>1、Hall?type current conversion, which can withstand 30 times the nominal input, prevents instantaneous high current access and burns out the internal components of the sensor. The measurement circuit is isolated from the incoming signal <br>2、Isolate the detection signal and the output signal, effectively filter the noise in the signal, which will greatly improve the signal?to?noise ratio and signal stability of the product, and effectively enhance the product's anti?interference ability <br>3、The primary and secondary sides of the hole current transmitter are highly insulated and isolated, which bring high accuracy, small size, low power consumption, wide frequency response, and anti?interference <br>4、No insertion loss because of erforated input, fixed with standard guide rail and flat screws, easy to install <br>5、Especially suitable for load current intelligent monitoring systems such as generators, motors, intelligent low?voltage power distribution cabinets, air conditioners, fans, street lamps, power grid monitoring, motor signal monitoring, railway system signal monitoring industriesPlease do not use 250ohm or 500ohm to connect 4?20mA output version of the transmitter to get 0?5V or 0?10V, this is a completely wrong method, you cannot get 0?5V or 0?10V signal, and it will make transmit becomes overheated or damaged.1 x AC Current Transmitter Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.