Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.3.It is a good replacement, replacing the old and broken ones, and it is convenient and quick to use.4.There are three kinds of speed control, you can switch to different speeds according to your needs.5.Wide range of use, used for ceiling fans, wall lights, cabinet lights, equipment, replacement speed control.Replacement model: Replacement for Hunter ceiling fan,Replacement for Hunter Replacement for SW-A09,Replacement for Sun-Lite Replacement for SL-A-300,Replacement for KTE3089T Replacement for Circuit M.Specifications:Material:Plastic and MetalColor:Silver Model: ZE-268S6Voltage Rating: 6A or 125VAC, 3A or 250VAC.Three Speed Control: OFF, Low, Medium, High (OFF, L-1, L-2-3, L-3).Chain Length: 11.5cm or 4.53inchSize:4x2.7x2.3cm or 1.57x1.06x0.91inch(LxWxH)Weight:52 gNote:1.Before removing the old switch, disconnect the fan power supply.2.Make sure to note the location of all wires that were disconnected during the removal of the switch.3.Do not cut the wire from the old switch, but insert the blade of a very small screwdriver beside the wire and pull it out to remove it. Then insert the tinned wires into the new switch in the same order as when they were removed. Inch4.If you cut the wire, you will lose the tinned rigid end and it will be difficult to insert it into a new switch unless you strip it again and re-tinned it using the following methods.Package include:3 x Chain Switch Control.