60A MPPT Charge Controller 12V/24V/36V/48V, Solar Charge Controller mppt Max LCD Backlight Solar Charge for Lead Acid Lithium Battery Note, please read all manuals before installing them. 1) Keep the controller away from water. Do not wipe the controller with a wet towel. 2) Keep the wiring correct, do not reverse the wiring. Please pay attention to the wiring sequence of the terminal blocks. 3) Keep the ambient temperature of the controller from -22C to +55C. Avoid direct sunlight. 4) It can maintain good heat dissipation performance. 5) Use pure copper wire and connect all polarities correctly 6) The load output is only suitable for the current of the DC load less than 5A. 7) If you are not professional, please do not set any parameters, because the controller can work normally by default, except for the lithium battery. Product manual linkhttps://docs.zohopublic.com.cn/file/41qmp77b4c47056674191bcf130c191c44cb7 Feature 100% MPPT controller Intelligent Maximum Power Point Tracking technology Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V Three-stage charging optimizes battery performance Multi-function LCD displays Reverse polarity protection of solar panel Overcharge protection Can be mounted easily Suitable for battery types of sealed lead acid, vented Gel, and Lithium battery Support unlimited parallel connection Parameter ModelIChargerMPPT6048 Charging TypeMPPT Max Current60A System Voltage12V/24V/36V/48V Auto Voltage Auto Identification12Vsystem(DC8.7V-DC15.5V); 24Vsystem(DC16V-DC31V); 36Vsystem(DC33V-DC41V); 48Vsystem(DC42V-DC64V) Battery Typelead-acid batteries(FLD\GEL\SLD) or lithium batteries or User batteries Max PV Voltage190V Max PV Power720W/12V system; 1440W/24V system; 2160W/36V system; 2880W/48V system Electromagnetic CompatibilityAccordtoEN61000,EN55022,EN55024 Automatic Temperature Compensation-3mV/2V/C Ambient Temperature-40~+75 Maximum Efficiency99% Waterproof LevelIP21 Size(mm)214x115x50 Netweight(Kg)1.1