STANDARD DIMENSIONS - Rubber trekking pole protectors have a hole diameter of 11 mm or 0.43" and are designed to fit most brands of trekking poles. NON-SLIP STABLE - Trekking pole protectors suitable for walking pole, telescopic pole and alpenstock pole. The extra soft rubber absorbs impact on hard surfaces to prevent slipping and improve stability and reduces the resulting noise. EASY TO INSTALL - A set of 6 protector tips allows you to worry less about losing and replacing damaged tips. SET OF 6 PIECES - Rubber tips wear out and tend to come loose and slip. It is always advisable to take extra tips, especially for long trips. walking pole tip Stable and Durable The circular design of the cover increases the contact area with the ground for more stability. Provides grip, traction, and stability for your hikes. The rubber material minimizes shock in hard pavement and effectively protects your trekking poles from wear. Trekking Pole Tips Metal Washer Inside The built-in metal washer extends the life of the pole tips walking poles. The rubber tips of trekking poles tend to wear out and fall off during long hikes. It is important to always have a few spares. If the rubber tip is excessively worn, please replace it in time to ensure safety. Tips for Hiking Walking Poles Rubber tips for 11mm diameter trekking poles Suitable for almost all brands of 11mm diameter trekking poles. Tips for Walking Poles What are rubber tips used for? 1. They help to gain extra grip, especially on flat or rocky surfaces 2. The tips Rubber tips protect the metal tips, so you don't have to wear out your carbide tips prematurely, and they also absorb some of the shock that goes into your poles. 3. Bare metal tips can leave marks, holes, and scars in the terrain and can even injure living things. Rubber tips help minimize environmental damage. 4. Bare metal tips can be quite noisy when used on rocky or paved surfaces. Rubber tips are quieter on rocks and help silence the clacking of trekking poles. Delivery quantity: 6 pieces Product color: black Product size: hole diameter 11mm Note: Manual measurement, please allow an error of 1 - 3cm!