Pneumatic Sandblasting Gun for Detail Finishing and Rust Removal A compact, durable sandblasting gun designed for targeted abrasive cleaning, polishing, and surface preparation. Combines a largecapacity feeding tank with an ergonomic grip and reliable metal components for consistent blasting performance in tight spots and across surfaces. Key benefits Efficient cleaning and surface preparation: Uses compressed air to propel abrasive media for rust removal, burr and scale removal, and surface roughening to improve coating adhesion. Saves time on detail work: The 21 lb feeding tank and smooth nozzle flow reduce refill frequency and deliver steady blasting for longer runs. Easy to handle in confined areas: Ergonomic nonslip handle and compact nozzle make it suitable for dead corners and complex shapes. Durable and serviceable: Plastic body with aluminum alloy components, an aluminum alloy trigger, and a hardness steel valve core for reliable operation. Main features and specifications Item type: Pneumatic sandblasting gun Materials: Plastic body plus aluminum alloy components Capacity: 21 lbs feeding pot Spray hole diameter: Approx. 6.5 mm 0.3 in Nozzle inner diameter: Approx. 6.5 mm 0.3 in Nozzle outer diameters: Approx. 7 mm 0.3 in and 13 mm 0.5 in (two nozzles included) Nozzle length: Approx. 67 mm 2.6 in Handle size: Approx. 45 x 25 mm 1.8 x 1 in Operating air pressure: 90 PSI Air consumption: 700 cfm Compatible abrasive media: Copper ore sand, quartz sand, emery sand, iron sand, Hainan sand, black steel jade, emery, spinach beads and similar blasting materials Nozzle design: Thickened galvanizing nozzle with a smooth inner wall for low resistance, faster blasting speed, and uniform abrasive flow Package contents 1 x Pneumatic sandblasting gun 1 x Feeding tank (21 lbs capacity) 2 x Nozzles Practical applications and scenarios Automotive restoration: Remove rust and old coatings from engine bays, undercarriage areas, and small parts where precision blasting is required. Metal fabrication and finishing: Clean weld seams, remove burrs, and prepare surfaces before painting or powder coating to improve adhesion. Tool and part refurbishment: Restore hand tools, fasteners, and small hardware by removing corrosion and scale without largescale equipment. Notes on use Requires a compressed air source capable of supplying 90 PSI and sufficient airflow for 700 cfm. Adjust abrasive type and pressure to match the workpiece and desired surface finish. Designed for targeted abrasive blasting and finishing of metal materials and detailed surfaces. Follow standard equipment handling practices when operating.