AC/DC power supplies and LED drivers — 12V and 24V Key benefits One solution for multiple needs: available in a wide range of power ratings (60W, 100W, 200W, 300W, 400W, 500W) so you can match supply capacity to the load without oversizing. Compatible voltages: 12V and 24V outputs support the most common LED systems and low-voltage control equipment, reducing the need for additional converters. Simplifies system design: choose between transformers (60W–500W) and dedicated LED drivers to power lights and other 12V/24V devices from AC mains. Clear specification for integration: an A/D converter is provided as a dedicated unit where required — A/D converter, 1 unit (60W, DC 12V). Product specifications Output voltages: 12V and 24V options across product families. Transformer / power supply ratings: 60W, 100W, 200W, 300W, 400W, 500W. LED drivers: available in 12V and 24V variants to match fixture requirements. A/D converter: 1 unit (60W, DC 12V). Function and compatibility Function: Converts AC mains to stable 12V or 24V DC power for LED lights and other low-voltage electrical components. LED drivers provide regulated output for lighting loads. Compatibility: Designed to work with common LED strips, modules, fixtures, controllers and other 12V/24V devices used in residential, commercial, and industrial applications. Performance sizing: Multiple wattage options let you choose the correct capacity for single fixtures, grouped runs of LED strips, or larger lighting assemblies. Construction and performance attributes Power range supports small to large systems (from a single lighting run up to higher-load installations). Durable, purpose-built power supplies and drivers designed for continuous DC output at rated wattages. Multiple voltage options make these units adaptable to existing 12V or 24V architectures without additional conversion. Practical applications (use scenarios) Under-cabinet and accent lighting: Use a 60W or 100W 12V driver for under-cabinet LED strips and task lighting with consistent brightness and reliable runtime. Commercial signage and architectural lighting: Select 200W–500W 12V/24V transformers or drivers to power runs of LED modules for storefront signs, cove lighting, or wall-wash installations. Control panels and low-voltage equipment: Provide stable 12V or 24V DC power for sensors, relays, controllers, and small electronic devices within an equipment cabinet; include the A/D converter (1 unit, 60W, DC 12V) where analog-to-digital conversion is required. Selection tips Match total LED wattage to the nearest higher transformer or driver rating to avoid overloading. For example, a 120W load should use a 200W unit rather than a 100W unit. Choose 12V or 24V based on your LED fixtures and controller compatibility; do not mix voltages on the same run. For multi-zone or expanding systems, select a higher-rated transformer/driver to leave headroom for future additions. Why this product solves common problems Eliminates voltage mismatch issues by offering both 12V and 24V options. Reduces procurement complexity with multiple standardized power ratings. Provides a clear, reliable power source for LED lighting and low-voltage devices to prevent flicker and underperformance caused by inappropriate supplies. Order information Transformers / AC-DC power supplies: available in 60W, 100W, 200W, 300W, 400W, 500W (12V / 24V options). LED drivers: 12V and 24V options. A/D converter: 1 unit (60W, DC 12V).