Item Type: AC Synchronous Motor Model: XD-80KTYZ Material: Copper Output Shaft Size: Approx. 10 x 20mm / 0.4 x 0.8in Protection Level: IP20 Insulation Resistance: After the rated operation of the motor under normal temperature and humidity, when measuring the insulation resistance between the coil and the motor shell with a DC500V resistance meter, it does not exceed 20M¦¸ Insulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, 50Hz or 60Hz is applied between the coil shells for one minute, and the abnormality is 1800V. Temperature Rise: When the gearbox or equivalent heat sink is installed, and the rated operation is performed under normal temperature and humidity, it is normal to measure the coil temperature rise value of 75-80¡æ by the resistance method. Insulation class: E class (130¡æ) Operating Environment Temperature: Motor: -10~+40¡æ (no icing) Use Environment Humidity: 85% or less (no condensation) CW/CCW: Yes Speed Adjusted: Yes ModelVoltage (V)Speed (rpm/min)Normal torsion(kgf¡¤cm) working for a long timeLarge torsion(kgf¡¤cm) intermittent workPower (W) XD80KTYZAC220V511413760 10576860 15384560 20283460 AC110V511413760 10576860 15384560 20283460 1¡¢Using all metal gears with great workmanship, which is wear?resistant, quiet, and long service life 2¡¢The motor has small size and large torsion, which can provide stable performance during operation 3¡¢The pure copper coil stator and rotor adopt pure copper coil, the deceleration resistance and conductivity are strengthened, so that the motor torsion is increased 4¡¢The motor uses high?quality magnetic tiles, higher work efficiency and less dynamic loss 5¡¢The lubricating oil applied to the motor gear is high temperature grease, low friction, noise reduction and slow temperature rise 6¡¢Mainly used in various industries such as micro machinery, various CNC machine tools, high?accuracy measuring instruments, electronic manufacturing equipment, financial machinery, military industry and other industries1 x Motor 1 x Capacitance