Features:Made of high quality aluminum, it is durable and has a long service life. The operation is simple, and the novice can also cook a delicious coffee. The shape of the octagonal pot is novel and elegant, beautiful and easy to clean. Easily extracted espresso with distilled pressure is a must for starter coffee. Safe and non-slip handle for comfortable use and firm grip. Specifications:Condition: 100% Brand NewMaterial: AluminumSize: approx. 9.8*17.8*19.5cm / 3.9*7*7.7inDistillation pressure:1. After the cold water at the bottom is heated, steam pressure is generated and squeezed toward the outlet.2. The steam passes through the middle powder bowl area to allow the coffee to be fully heated.3. The extracted espresso flows from the central channel to the upper pot.Instructions:The pot is divided into upper and lower pots, and the bottom pot is filled with water. There is a mesh funnel compartment between the upper and lower pots to put the coffee powder. After heating, the water in the pot will become high-pressure steam, and the steam will go up and pass the coffee in the middle layer. Powder, reach the pot and turn into coffee. The specific operation method is as follows:1. Unscrew the upper and lower pots and take out the powder tank on the bottom pot. (The powder tank is the funnel-shaped container with many small holes placed on the lower pot and the upper pot.) Then add water to the pot. Note that the water level is controlled. 0.5 cm below the safety valve, the safety valve will automatically relieve pressure when the pressure of the lower pot is too high to prevent a safety accident; if the water level is higher than the safety valve, the function of the safety valve will not function properly.2. Remove the funnel-shaped powder tank placed on the lower pot mouth, add the coffee powder to the powder tank, and properly vibrate the powder tank to make the coffee powder evenly distributed. Pay attention to gently shake the coffee powder. Do not press the coffee powder too hard. The compaction causes the steam to not go up. The coffee powder should not be too full to prevent the upper and lower pots from tightening.3. Put the powder tank filled with coffee powder back to the original position, and then install the upper and lower parts of the moka pot together. Please pay special attention to the upper and lower pots must be tightened. In actual use, some cases have not been tightened and the thread is leaking. , tightening will be fine, please pay special attention.4, put it on the gas stove or electric stove to heat, after the water is boiled, the steam goes up, through the coffee powder in the middle powder trough compartment, reaches the pot and turns into coffee, the coffee will pop up from the pillar in the middle of the pot. . Generally, it needs to be heated for about 3 or 4 minutes, but be careful not to overheat it. Do not let the water in the pot be dried, causing the coffee powder to have a burnt smell. Generally, the coffee coming out of the column in the middle of the pot becomes less. Turn off the fire.Package list:1 * Cup Head1 * Filter1 * Cup BottomNote:1.Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.