Snowfoam Pro features next generation micro foam technology which can be applied using any domestic or professional pressure washer with a foam attachment or a foam gun. Snowfoam Pros small bubble size means more contact with the vehicle and a more dense blanket of soft white foam to lift dirt and debris from the vehicle surface. Citrus infused cleaning action softens and removes dirt and surface contaminantsStable, high cling formulation maximises contact time with dirt and debrisCan be used as a pre-wash for heavily soiled vehicles or as a foam shampoo on lightly soiled or pre-washed vehiclespH balanced formulation will not remove wax or harm paint protection systems. Suitable for use with Ceramic coatings and conventional paint protection systems Silicone Free Instructions For best results do not use in direct sunlight and ensure the vehicle is cool to touch. If necessary, rinse the vehicle to remove heavy dirt and loose debris. Apply using a snowfoam lance ? fill the bottle with neat product and adjust dilution to suit using the chemical control valve on the lance. If no control valve is present or for injector based systems then we recommend the Snowfoam Pro is used at a dilution of between 20:1 & 80:1; higher concentrations will give a richer, thicker foam with a better cling while higher dilutions will give a lighter, thinner foam for a faster rinse. To use as a Pre-Wash Apply a rich, even layer of foam to the vehicle from the bottom up. Leave for up to10 minutes and then rinse with water. Do not allow product to dry onto vehicle. To use as a Foam Shampoo Apply a thin, even layer of foam then agitate using a wash mitt and rinse with water.