Item Type: BERM Switching Power Supply <br>Material: Aluminum, PCB <br>Purpose: Power supply function <br>Output Value: <br>DC Voltage: 12V/ 24V <br>Rated Current: 10A/ 5A <br>Current Range: 0~10A/ 0~5A <br>Rated Power: 120W <br>Ripple and Noise (maximum): 120mVp-p/ 150mVp-p <br>Voltage Adjustment Range: 10.2 ~ 13.8V/ 21.6 ~ 28.8V <br>Withstand Voltage: ±1.0%/ ±1.0% <br>Line Adjustment: ±0.5%/ ±0.5% <br>Load Regulation: ±0.5%/ ±0.5% <br>Setting, Rise Time: 500ms, 30ms/ 230VAC; 500ms,30ms/ 115VAC (full load); <br>Holding Time (typical Value): 55ms/ 230VAC; 10ms/ 115VAC (full load); <br>Input Value: <br>Voltage Range: 85~264VAC; 120~373VDC (withstand 300VAC surge current for 5 seconds without damage) <br>Frequency Range: 47 ~63Hz <br>Efficiency (typical value): 88%/ 90% <br>AC Current (typical value): 2.3A/ 115VAC 5A/ 230VAC <br>Inrush Current (typical value): 50A / 230VAC <br>Leakage Current: <0.75mA240VAC <br>Protection: <br>Overload: 110~150％ of rated output power; protection type: Hiccup mode, automatic recovery after the fault condition is eliminated <br>Surroundings: <br>Working Temperature: -20~+70℃ <br>Working Humidity: 20~90%RH non-condensing <br>Storage Temperature and Humidity: -40~+85℃, 10~95%RH <br>Temperature Coefficient: ±0.03% ℃ (0 ~ 50℃) <br>Vibration: 10 ~ 500Hz, 5G 10 minutes/1 cycle, 60 minutes each along the X, Y, and Z axes. <br>Safety and EMC: <br>Safety Standard: EN60950-1, approved. <br>Withstand Voltage: I/P-0/P: 1.5KVAC I/P-FG: 1.5KVAC 0/P-FG: 0.5KVAC <br>Isolation Resistance: I/P-O/P, I/P-FG, 0/P-FG: 100M Ohms / 500VDC/25℃/ 70% RH <br> <br>How to Use: Can be used when connected to the current line, L is connected to the live wire, N is connected to the neutral line, +v is connected to the output positive pole, -v is connected to the output negative pole, the white regulator can be used for fine adjustment, and the ground wire identification is the ground wire interface.<br>1、The AC input range can be selected by the switch, which is very convenient to use. <br>2、This power supply can withstand 300VAC surge current for 5 seconds without damage. <br>3、There is an LED indicator for booting, which can withstand 5G vibration test. <br>4、After 100% full load aging test, the maximum working temperature can get 70℃. <br>5、With great workmanship, with high efficiency, long service life and high reliability.1&nbsp;x Power&nbsp;Supply Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.