Bestway Flowclear 2500gal Capacity Filter Pump Swimming Pool, Multi-colouredThe Bestway 2500gal Flowclear Filter Pump is essential for pool owners to keep their pool water clean and hygienic over the summer months. The swimming pool filtration pump keeps clean water circulating by pumping it out of the swimming pool, through a filter cartridge and back again. Two hoses are included with the Bestway pump and are attached to two separate points on the swimming pool.The loose end of one hose is connected to an inlet on the filter pump and the end of the other hose is plugged into an outlet. Water is pumped out of the pool and through the inlet hose at a rate of 2500gal per hour, before being sanitized by the filter cartridge and pumped back through the outlet hose. It then begins its journey all over again, providing clean, clear, hygienic water. The Bestway 2500gal Flowclear Filter Pump comes with an installation manual to guide you through the simple setup process. Recommended for use with 300-14000 gal pools.Features :Pump’s water flow rate (pump capacity): 9,463 L/h (2500 gal./h)For use with 1,100-17,400 L (300-14,000 gallons) poolsInstallation:PART I Internal Filter Pump Inspection: Remove the Filter Cap by unscrewing the Filter Cap Retainer. Inspect the Filter Cartridge ensuring it is centred in the Filter Pump. After inspection, check that the Filter Cap Seal is in place, replace the Filter Cap and screw the Filter Cap Retainer into position.PART II Attach the Hoses to the Filter Pump and the Pool: Place the loose Hose Clamps on both ends of the Hoses. Attach the Hoses to the corresponding letters on both the pool and the Filter Pump (A to A, B to B). Tighten the Hose Clamps to the Filter Pump by screwing the fly nut clockwise. Remove the Stopper Plugs from the pool’s Inlet and Outlet Valves and insert the Debris Screens. With the Hoses and the Debris Screens in position, tighten the Hose Clamps.PART III Preparing the System for Use: Open/unscrew the Air Purge Valve on the top of the Filter Pump; the air is released as water fills the Filter Pump. When water comes out of the Air Purge Valve screw it closed and wipe away any water. To start the Filter Pump, Insert the plug of the filter pump into a residual current device (RCD).Pump Maintenance: Stop Water Flowing to the Filter Pump. Unscrew the Filter Cap Retainer and remove the Filter Cap. Clean the Filter Cartridge with a garden hose. Insert the cleaned Filter Cartridge; ensure it is centred in the Filter Pump. Check that the Filter Cap Seal is in place. Replace the Filter Cap and screw the Filter Cap Retainer into position. Replace the Stopper Plugs with the Debris Screens in the pool’s Inlet and Outlet Valves. Tighten the Hose Clamps. Water will now flow to the pump. Open the Air Purge Valve to remove any air from the system as outlined in Pump Installation.Safety Warnings:Do not permit children to use this product unless they are closely supervised at all times.The pump cannot be used while people are inside the pool.When working with electricity, turn the electrical power off at the circuit breaker and lock the breaker door. Failure to do so will result in an increased risk of shock, injury and possibly death.To reduce the risk of electric shock, If Filter Pump Power Cord becomes damaged in any way, the pump must be discarded.Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic failure of the pump.Place pump on solid and level ground. Pay attention to the position of the pool and pump so adequate ventilation, drainage, and access for cleaning are available.Never place a pump in an area that may accumulate water, or in an area where foot traffic will flow around the pool. It is necessary to have the plug accessible after the installation of the pool.Store the filter pump in a dry location out of the child’s reach. Do not run the pump for more than 8 hours per day.Do not add chemicals to the filter pump.Package Includes:Flowclear 2500gal Filter PumpFilter cartridge required for operation 58095 Gr. IV (14.2 x 25.4 cm)2x hoses of 4.5 m each / diameter 38 mm1x pool inlet sieve, 1x pool outlet sieve for 32mm32 mm connection adapter with hose clamps (2 pieces each)