Industrial style in your kitchen with the Indus copper mixer tap, for a vintage and industrial look at the same time Easy to install with its system it is resistant to limestone DESIGN: - Sink mixer tap. - Swivel spout. - Copper finish. - Round body. QUALITY: - Brass body with copper finish. - Metal handle. - Ceramic cartridge 25 mm in diameter. - ESSEFIX system (easy fixing without tools) - Pop-up (click-clack or push up) allows to open and close by simple pressure of the finger. - 35 cm stainless steel braided lyres included STANDARDS: - ACS Certification: Accreditation of Sanitary Compliance. Dimensions - Total height: 37.4 cm - Height under spout : 28.3 cm - Width between the water outlet and the axis of the faucet body: 19.7 cm - Base diameter: 48 mm. Check that the length of the spout is compatible with your sink (see technical drawing) Advice on use and installation - Before mounting, we recommend that you carefully purge the hot and cold water pipes to prevent dirt and residue from compromising the proper functioning of the taps. - After turning off the main water supply , dismantle the old taps. - Thoroughly clean the threads of the main water supply tubes. - Install the kitchen mixer tap in a 35 mm hole in a sink or worktop. Maintenance advice To keep your faucet as long as possible, it is best to clean it every day with a damp, non-abrasive cloth or a microfiber, finish by wiping with a microfiber or a dry cloth. Never use solvents, metallic sponges, bleach, acids, strong detergents, chemical cleaning products harsh or solvent-based cleaning solutions on the product.