Colorway Wild Camera with Night Vision | Night camera with Time Lapse | PIR Motion Detector
This Colorway camera is specially for recording and observing wild animals and can also serve as a security camera.
As soon as wild animals enter the detection range of the side-movement sensors, the camera is activated and the movement is detected.
If the animal continues to move to the detection area of the central sensor zone, the camera starts taking photos and / or videos (depending on the configuration).
After the animal is outside the detection range of the side-motion sensors, the camera turns off and returns to standby mode.
The camera has three work modes:
1. Photo mode
Select a photo format: 1MP, 3MP, 5MP, 8MP, 12MP, 16MP.
2. Video mode
Select a video resolution: 1920X1080, 1280X720, 720X480, 640X480.
3. Photo + Video mode
In Photo + Video mode, the camera first takes a photo and then starts recording a video.
The recording delay can be set between 5sec-60 minutes. The camera does not record photos or videos during the selected interval. It prevents the memory card from becoming full with too many recordings of the same event.
Sensitivity of the motion sensor
The sensitivity of the main motion sensor can be set to "High" for interior spaces and environments with little interference. Select "Medium" for outside areas and an environment with normal amount of interference. And select "Low" for an environment with a high interference level.
During night-time shooting, the infrared LEDs on the front of the camera provide the necessary light for taking photos. The range of the LEDs ensures that the camera takes pictures within 3 - 20 m.
Specific recording time
With this function, the camera only works every day during the set time. After this period the camera is on standby.
This camera has a Time-Lapse function, with which a time interval for recording can be set. This function can be used as an example if the flower flowering process is to be registered. The camera then automatically takes photos at any time interval.
This function can be used to play the photos on the memory card automatically. Each photo is displayed for approximately 2 seconds.
This function can be used to protect individual recordings against accidental erasure.
The camera can transfer the video signal to an external monitor or the video input of a television.Connect the camera to a computer via a cable to copy photos and videos to the computer.
Sensor image: 2MP CMOS sensor
Functions: Video recording / photo / playback
Lens: F2.3 f = 3.8 mm
LCD: 2.0 inch LCD
Photo resolution: 16M (5376x3024), 12M (4608 x 2592), 8M (3840 x 2160), 5M (3072 x 1728),3M (2304 x 1296), 1M (1280 x 720)
Video resolution: 1920 x 1080, 1280 x 720, 720 x 480, 640 x 480
Memory type: TF card (up to 32GB max)
Format: JPEG, AVI
USB connection: USB 2.0
Power requirements: 6V
Language: English / French / Spanish / German / Portuguese / Italian / Chinese
Dimensions: 108.5 x 75.5 x 46 mm
Water resistance level: IP65
The device works on 4x 1.5v AA batteries and can optionally be used with an adapter (batteries and adapter not included).
Wild camera x1
16GB SD card x1
USB cable x1
Fastening belt x1
Instruction manual x1