The 24V(22V40V) to 19V 25A Step Down DC DC Converter is a fixed output buck converter designed to transform a higher DC input into a stable 19V supply at 25A. It accepts a wide input range of 22 to 40 volts, with 24V as the typical operating level, making it suitable for industrial, automotive, and off grid applications where a 19V device supply is required. Key benefits Delivers a steady 19V at 25A from a broad 2240V input range, enabling reliable operation of 19V equipment. Enables direct powering of 19V devices from common 24V systems, reducing the need for multiple voltage rails or adapters. Supports current loads while simplifying wiring and power architecture. Improves system efficiency by stepping down from a higher input to 19V instead of using less efficient alternatives. Provides a fixed 19V output for straightforward integration with devices that require a dedicated 19V supply. Key attributes Functionality: Fixedoutput stepdown DCDC converter (buck) with 19V output. Compatibility: Input range 2240V; output 19V at 25A; suitable for devices that require 19V. Size: Not specified in the listing. Material: Not specified in the listing. Performance: Capable of delivering 19V at 25A from a 2240V source; designed for operation within its specified input and output ranges. Use cases Powering a 19V laptop, monitor, or other 19V devices from a 24V vehicle, industrial, or solar power system. Supplying telecom or network equipment that requires a 19V supply from a 24V DC bus or higher DC sources. Providing an efficient 19V supply for laboratory instruments or test benches powered by a 24V power source or battery setup. Notes Verify device power requirements (P = V x I) to ensure total current draw does not exceed 25A. Ensure adequate heat management for continuous load operation within the specified input and output ranges.