Features: <br>This DC-DC step down module can convert 12V to 3.3V, and there is also a 12V output. <br> <br>Specially designed two rows of needle fixing hole that can be directly fixed on universal PCB to extend the experiment. <br> <br>Using multiple input and output pins, easy to use and connect. <br>There is a red power supply indicator light that you can check power state. <br> <br>Input voltage can be DC 6V to 12V, but input voltage should be 1V higher than output voltage. <br> <br> <br> <br>Specifications: <br>Input Voltage: DC 6V to 12V <br>Output Voltage: 3.3V (± 0.05v error), <br> 5V (± 0.05v error), <br> 12V (12V input directly to the output) <br>Max. Output Current: 800mA (load current can not exceed 800mA) <br>Size: Approx. 32 x 32 x 13mm / 1.26 x 1.26 x 0.51" <br> <br> <br>Package Includes: <br>1 x Module <br> <br> <br>Note: <br> <br>Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.<br>1、This DC-DC step down module can convert 12V to 3.3V, and there is also a 12V output <br>2、Specially designed two rows of needle fixing hole that can be directly fixed on universal PCB to extend the experiment <br>3、Using multiple input and output pins, easy to use and connect <br>4、There is a red power supply indicator light that you can check power state <br>5、Input voltage can be DC 6V to 12V, but input voltage should be 1V higher than output voltage