Item Type: Digital Counter_x000D_ Material: ABS_x000D_ Battery Model: 1 x 1.5V AA battery(not included)_x000D_ Counting Range: 0-999999_x000D_ Highest Frequency of Counting: 20HZ_x000D_ Counting Minimum Pulse Width: 2MS_x000D_ Magnet Induction Proximity Distance: Approx. 10 ~ 15mm / 0.39 ~ 0.59in_x000D_ Magnetic Induction Distance: Approx. 35mm / 1.38in_x000D_ Clear Minimum Pulse Width: 1S_x000D_ Ambient Temperature: -5~40_x000D_ Dimension: Approx. 68 x 30 x 45mm / 2.68 x 1.18 x 1.77in_x000D_ Hole Size: Approx. 61 x 35mm / 2.4 x 1.38in_x000D_ (The size may be certain error due to manual measurement) 1SIX DIGIT CLEAR DISPLAY: Six digit large screen LCD display, possess ultra low power consumption, long battery life, large and clear display 2EASY TO OPERATE: Press the pause switch(POWER) for one second to pause the count, save the data, and enter the shutdown state, press the pause switch again for one minute to turn on the screen display and resume the count 3ACCURATE AND CONVENIENT: This counter using magnet induction, simple and convenient installation, bring accurate counting 4FAST COUNTING SPEED: Panel mounted fixing screws have a maximum counting speed of 20 times per second, 1200 times per minute. When the magnet is sensed, the ok indicator will be displayed on the screen 5EASY BATTERY REPLACEMENT: Using ordinary AA batteries(not included), no external power supply is required, and the battery is easy to replace, very convenient 6SEISMIC PROOF AND DURABLE: Adopt seismic proof design, effectively ensure the stable and reliable operation of the system, no mechanical wear with long service life1. The signal line for counting and clearing input should be as short as possible to avoid wiring with strong electricity or power lines to avoid unnecessary interference; if necessary, please use shielded lines, and the shielding layer is connected to the counting terminal +._x000D_ 2. Only the contact signal without voltage can be input for the counting signal and the reset signal, and no other electrical signals can be input._x000D_ 3. The sensing distance is related to the magnetic size of the magnet. You can change the sensing distance by changing different magnets._x000D_ 4. The use temperature of the magnet cannot exceed 70 degrees Celsius. If the temperature is too high, the magnetism will disappear and the induction will fail._x000D_ 5. When the screen display is blurred, please replace the new battery; when not in use for a long time, please press to pause or switch the machine to turn off the counter and auxiliary battery; you can also take out the battery together to prevent the battery from deteriorating and leaking and damaging the counter._x000D_ 6. Use an ordinary AA battery, never connect an external power supply (external power supply will damage the counter); the power consumption of the counter is ultra low, so it is not necessary to press the pause or switch to turn off the counter every day to save power._x000D_ 7. If the counter is abnormal, it can be restarted. Method: Take out the battery, install the battery in the opposite direction, then take out the battery, and then install the battery in the standard direction. 1 x Counter 1 x Magnetic Control Induction Switch 1 x Magnet 1 x Bracket