Description [Dual Digital Display PID Temperature Controller Set] PID Controller Set comes with digital PID REX-C100 Temperature Controller max.40A SSR K Thermocouple for your use[Compatibility]This PID Temp Control is specially designed for single phase solid state relay[Proportional Band (P)] 0~full range (ON/OFF control when set to 0)[Time Set)]Integral time (I):0~3600 sec (No integral action when set to 0), Derivative time (D):0~3600 sec (No derivative action when set to 0) [Setting value (SV)]identical to measuring range (PV)1.REX-C100 Temperature Controller 2.Measuring accuracy:+/-0.5% 3.Cold-end compensation tolerance:+/-2 Celsius can be modified by software in 0~50 Celsius4.Resolution:14 bit5.Sampling cycle:0.5 Sec6.:AC 110-240V 50/60HZ7.Process value (PV), Setting value (SV)8.Output, alarm and self-tuning can be indicated by:LED9.PIN control (including ON/OFF, step-type PID and continuous PID)10.Self-tuning control11.Relay output:contact capacity 250V AC 3A (resistive load)12.Alarm function output:2 way13.Proportional (P):0~full range (ON/OFF control when set to 0)14.Detective temperature range:0 to 1300 Celsius15.Insulation :Greater than50M ohm(500V DC)16.Insulation :1500V AC/min17.Insulation : Consumption Less than 10 VA18.Service environment:0~50 Celsius19.Environment with no corrosive gas 30~85% RHK Thermocouple Probe Cable1.Length:1M2.Sensor diameter:4.5mm3.Temperature rang:0 to 400 Celsius(U can install to 1300 Celsius K Thermocouple Probe(not included) )4.Internal Insulation:Fiberglass5.External Shielding:Insulated ShieldingMax.40A SSR1.Output Voltage Range:Standard Type2.Output Current:40A3.Input Voltage:DC 3-32V4.Output Voltage:24-380V ACcolour: BlackMaterial:plasticPackage Contents:1 * PID Controller1 * SSR-40DA1 * K Thermocouple SensorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.