Feature 1Allaluminum turntable, with antiskid lines, more strong adsorption to clay, anticorrosion, and easy to clean. 2Safe power interface, power jack cover, prevent clay and water from entering, prevent leakage, plug and play. 3Drawing and repairing can be easily dealt with, suitable for children/children/students over 3 years old and other ceramic lovers. 4Speed controller adjusts speed, good and stable speed, exquisite mini embryo drawing machine, easy to clean, strong and light, easy to carry. 5Used for working clay, handicrafts, homemade, school teaching, individual interests and hobbies, etc.Item Type: Electric Pottery WheelMaterial: Stainless Steel + AluminumVoltage: 110-240VTurntable Diameter: Approx. 6cm / 2.4inApplicable People: Pottery Students over 3 Years Old, or Those Who Specialize in Making Small PotterySpeed control: After the lever is forward and reverse, rotate the speed control knob to the right to accelerate. MAX is the highest speed.Maintenance: After the machine is used, it can be wiped clean with a wet towel or a wet sponge. After the appearance is free from dirt, use a dry towel to remove the moisture. Remember not to rinse directly with water.Power on: After connecting the power controller, connect to the power source. Turn the power control to MIN, press the lever, and the turntable starts to rotate.Forward and reverse: Press the lever upward to rotate clockwise. Reset the lever to stop rotating. Press down the lever to turn it counterclockwise.Shut down: Reset the pull rod to the middle. Turn the power control to OFF Package List: 1 x Electric Pottery Wheel1 x Power AdapterNoteIf you first turn the power controller to OFF and the lever is not reset, you will find that the turntable is still rotating, which is a normal phenomena and will stop rotating within 5 seconds.