Specification: Type: Suction Welder Material: ABSandstainless steel Working voltage: AC110V Plug specification: European stard plug or American stard plug Heater power: 30W Electromagnetic power: 350W (instantaneous) Specification of three-piece nozzle: about 1mm or 0.04in, 1.5mm or 0.06in, 2.5mm or 0.1in Insulation grade: Grade E Working method: continuous Product category: Chip level maintenance tools, mainboard maintenance tools, circuit board component disassembly tools. Features: 1. Strong suction: Strong suction, applicable to integrated circuits large components. 2. Automatic tin function: It can save you a lot of effort improve work efficiency. 3. After turning on the power for 3 minutes, the tin removal can be carried out for a long time. 4. Simple operation: equipped with long wires three nozzles, disassembly welding suction can achieve simple one-hed operation. 5. Simple to carry, light in weight, compact in size, convenient to use Automatic tin absorption, fast convenient, a good helper for improving work efficiency during maintenance. Usage method: 1. Warm up for 3-5 minutes after connecting the power supply. 2. Align the solder joints to be removed melt the solder. 3. Press hold the tin suction button to suck the solder into the tin storage cylinder. 4. Remove the solder joint from the solder aspirator, release the solder aspirator button to eject the solder slag. Package: 1x Tin suction device 1x Cleaning needle 1x Suction nozzle 1x Instructions