Item Type: Winch Remote Control Kit _x005F_x000D_Material: ABS + Metal_x005F_x000D_Battery Type: Alkaline battery (included)_x005F_x000D_Battery Capacity: 150mAh_x005F_x000D_Battery Model: 12V 23A_x005F_x000D_Frequency: 434MHz_x005F_x000D_Voltage: 12V_x005F_x000D_Remote Control Size: Approx. 43 x 100mm/1.7 x 3.9in_x005F_x000D_Receiver Size: Approx. 43 x 70mm/1.7 x 2.8in_x005F_x000D_Features:_x005F_x000D_The remote range is up to 50 feet._x005F_x000D_The transmitter is equipped with a long life._x005F_x000D_Battery and power saving circuit._x005F_x000D_Transmitter and receiver._x005F_x000D_The visual indicator shows remote operation._x005F_x000D_An additional transmitter that can be used to operate the receiver._x005F_x000D_Installed in a few minutes._x005F_x000D_Transmitter replacement battery is available at any time._x005F_x000D_Suitable for Truck, ATV, SUV_x005F_x000D__x005F_x000D_The wireless remote control is only designed for the front self-recovery winch._x005F_x000D_The remote control is not designed and used in industrial applications (commercial vehicle transporter/transporter, wrecker, crane, etc.) or any other remote control application for winches or cranes._x005F_x000D__x005F_x000D_We recommend that you operate the winch as follows:_x005F_x000D_1. Loosen the winch clutch._x005F_x000D_2. Pull out the winch wire rope about 1.5 meters._x005F_x000D_3. Re-engage the clutch of the winch._x005F_x000D_4. Insert the plug of the remote control receiver into the female connector of the electromagnetic control box of the winch. If your wireless remote control is -03 type, you should correctly connect the black ground wire to the negative pole of the battery._x005F_x000D_5. Put your receiver somewhere._x005F_x000D_6. Keep the receiver antenna straight._x005F_x000D_7. Pull out the transmitter antenna and move the transmitter cover down to expose the control buttons._x005F_x000D_8. Press the button, you can operate the winch to start, stop, in and out._x005F_x000D_(It is strongly recommended to find a professional to install) 1Wireless remote control, allows you to operate the winch within a range of 50ft without the need for cables or switches. 2Easy to operate, you can start, stop, in or out the winch just by pressing the remote control transmitter. 3Suitable for most self?recovery winches, such as for Warn, for Ramsey, for Superwinch, for Smittybilt, for Gorilla, for Bulldog, etc. 4Designed with visual indicator light, which can clearly and intuitively display remote operation, convenient for using. 5Manufactured according to the original production specifications, in line with strict quality standards, long service life. 1 x Remote Control 1 x Receiver 1 x Manual