About the product 1. EPP material body, shock-resistant 2. Carbon fiber material blades, high hardness and good rebounce 3. Landing gear for stabler glide 4. Function: forward, sidewards flight, simple rollover, dive 5. Remote control is powered by 6 x AA batteries (not included) 6. Flying height: 80-120m 7. Package includes: -1 x RC Glider -1 x Remote control -4 x Blades -2 x Landing gears -1 x Screwdriver -1 x USB cable -1 x Manual -1 x Wrench Note: 1. Please install the aircraft battery correctly as install upside down will burn the mainboard 2. Please wrap around nose and wing with 1 or 2 layers transparent tape before flying 3. Please charging the aircraft when you receive it -Large aircraft: turn off the power when charging, using the included USB cable to charge the aircraft, the light is off when charging, the light will turn red when fully charged -Small aircraft: remove the battery from aircraft and charge it with individual charger, the light is red when charging, the light will turn green after fully charged 4. Please bind the frequency of aircraft and remote control before flying -Large aircraft: turn on aircraft, then turn on remote control, move the remote control near the belly of the aircraft, pull the throttle up and down to the max when indicator light on the remote control stops flashing to bind the frequency -Small aircraft: turn on remote control, then turn on aircraft, pull the throttle up and down to the max when indicator light on the remote control stops flashing to bind the frequency 5. Misoperation of the aircraft will lead to crashing and damaging, just fix the broken part with glue, the aircraft will work just fine