This fan heater from Perel is ideal for heating workshops, garages, etc. The robust unit has a heating capacity of 2,000 W and is equipped with three heat settings, a fan function and a thermostat. Thanks to its overheat protection, the device shuts itself off immediately when it gets too hot. There's a handle on the top so you can easily move the device... Basic product information: •• Operating instructions Languages: Dutch, English, French, German, Polish, Portuguese, Spanish •• Primary colours: Red •• Additional colours: black •• Depth unit: 200 mm •• Height unit: 315 mm • • Width Unit: 215 mm •• Weight Unit: 3.6 kg •• Material: Steel •• Additional materials: Pa (Polyamide), Pc (Polycarbonate), Pp (Polypropylene) • Physical properties: •• Power cord length: 1.5 M • • Display: No •• Shape: Cube •• Cable included: Yes •• Cold air function: Yes •• Number of heating settings: 3 •• Heating type: Fan • Electrical data: •• Electrical protection: Overheating • Technical data: •• Cable type: H05Rn-F 3G1 •• Installation type: Floor stand, Freestanding •• Air output: 152 m³/h • Environmental data: •• IP rating: IP24 •• Place of use: Indoor only • Operating characteristics: • • Fan function: Yes •• Heating area: 82 m³ •• Switch type: Rocker •• Heating settings: 1300 W, 2000 W, 650 W • Electrical connections: •• Mains plug type: Type E/F (France/Germany) • Power supply: •• Input frequency Nominal: 50 Hz •• Power consumption: 2000 W •• Input voltage Nominal Vac: 230 V • Included: •• Timer: No •• Thermostat: Yes •• With wheels: No •• Handle: Yes •• With remote control: No.