Fiber optic cable tester, multi-function network tester, network cable tester, multi-function fiber optic wattmeter, visual cable fault locator, detec

General DescriptionThis is a versatile, integrated network testing solution, combining a network cable tester and a digital multimeter. It offers a comprehensive set of features, including AC/DC voltage, diode, resistance, capacitance, and AC/DC current measurement, cable fault detection, cable length measurement, and PoE functionality. Equipped with a high-precision photometer, it can measure light levels from -6dBm to -70dBm, ensuring accurate and reliable measurements for the maintenance and troubleshooting of fiber optic networks. The visible red laser receiver enables the detection of fiber optic cable faults up to a distance of 10 km, facilitating the identification and location of breaks or bends, making it an indispensable tool for the maintenance and repair of fiber optic networks. It also offers a powerful cable analysis function, including open, short, crossed, and pressure detection on LCD connectors, to ensure network integrity and performance. Its ergonomic design with a 3.2-inch high-definition LCD screen, supporting four languages ​​(Chinese, English, German, and Spanish), and an intuitive interface, makes it easy to use for users worldwide.FeaturesIntegrated Network Testing Solution: Combines a network cable tester and a digital multimeter.Accurate Photometer: Measures light power from -6dBm to -70dBm.Fiber Optic Fault Detection: Visible red laser receiver for detecting faults up to 10 km.Advanced Cable Analysis: Detects open connections, short circuits, crossovers, and connector pressure.User-Friendly Interface: 3.2-inch high-definition LCD screen, 4 languages ​​supported.PoE Function: Tests standard and non-standard PoE, measures voltage and polarity.SpecificationsProduct: Multipurpose Network Cable TesterProduct Material: ABSLength Measurement: Ethernet Network (600M) / Telephone (400M) / Coaxial Cable (400M)Light Output: mW/μW/nW/pW/-70.00~-6.00dBmRed Light Output: 10mW (approx.)10km), blinking (1Hz/2Hz) / offPoE Device Test: Standard/non-standard PoE, voltage/polarity valueID Matching Function: Optional +15Work Log: Stores 100 records/unit/amountDC Voltage: 600.00mV~10A (±1%+0.5)AC Voltage: 600.00mV~750V (±0.8%+0.5)DC Current: 600.00mA~10A (±1%+0.4)AC Current: 600.00mA~10A (±1%+0.5)Resistance: 600.00Ω~60MΩ (±1%+0.6)Capacitance: 6.0000nF~60MF (±2%+0.6)Frequency: 6.0000Hz~6MHz (±1%+0.1)Open/Close Ringtone: YesPackage List1 * Main Line Unit1 * Receiver1 * USB Type-C Cable1 * RJ45 Cable1 * Alligator Clip7 * Probes1 * Adapter1 * User Manual1 * Storage BagUsageNetwork Cable Test: Connect the ends of the network cable to the appropriate ports on the main and receiver devices. The device will display the cable type and any faults.Multimeter Measurement: Select the measurement function (voltage, current, resistance, capacitance, etc.) on the display. Connect the probes to the corresponding terminals and to the component to be measured.Light Power Measurement: Connect the photometer to the optical fiber under test. The device will display the measured light power.Optical Fiber Fault Detection: Activate the visible red light and point the laser at the optical fiber. Observe the light to locate faults.PoE Test: Connect the PoE port of the device under test to the device. The device will display PoE information (standard/non-standard, voltage, polarity).InstructionsSafety: Avoid looking directly at the visible red laser to protect your eyes. Wear safety glasses if necessary.Measurements: Take measurements in a dry and clean environment. Observe the maximum measurement ranges to avoid damaging the device.Maintenance: Clean the probes and connection ports regularly with a soft cloth to ensure accurate measurements.Storage: Store the device and its accessories in the provided storage bag, in a dry place at room temperature.Charging: Use the provided USB Type-C cable to recharge the device when the battery is low.