[16 non-slip hooks] The storage hook is made of ABS material, which is not rusty, sturdy, waterproof, scratch-resistant. humidity and at corrosion. There are enough screws to ensure stability. Each rail is 16 inches and a total of four rails are 64 inches. Each hook has a non-slip vinyl coated pin to prevent items from falling [Loading] Tool organizer with large capacity dump. The capacity load capacity of plastic pins and 5-shaped metal hooks can reach 8 lbs (3.6 kg) and 15 lbs (6.8 kg) when properly installed [Saving place] 5-shaped metal hook design, can hang various tools, such as rake, shovel, broom, mop and any tools with handles. The plastic hook can hang rags, threads, cleaning supplies, etc. ÉSave space and keep kitchen, garage and workshop tidy [Package] 4*16 inch ABS rail, galvanized steel hook 16*, with non-slip vinyl coating pins, 20* pins, 4 connectors, 4* wall rail mounting holes, 20* screws, 20* pins. It is recommended To use a concrete or wooden wall for the installation location, please make sure there are no cables or water pipes on the wall [Applicable and adjustable] The storage system has a wide range of uses. It is very suitable for hanging shovel, shovel, rake and other gardening tools in garages, basements or sheds. Or used in workshops, cabinets and other storage tools with rods. The installation method can refer to; our video Product Description Step 1 Select installation location and score Step 2 Drill holes (diameter 6mm) at the marked points on the surface, then insert the pins into the holes Align the screw holes with the inserted pins and secure the guide rails with opposite; metal Step 3 Install the hook and the plastic pin in the slot the fourth step You can extend the rail with connectors as needed. Or terminate the rail with a locking connector