GVC 2KW ELECTRIC Convector Heater with 3 Adjustable Heat SettingsThe heater has been designed using the latest technology. With normal maintenance, your heater will provide years of satisfactory performance. Please read this Instruction Manual carefully before using it and save it for future reference.ASSEMBLY OF THE HEATER: Before using the heater, the feet (supplied separately in the carton), must be fitted to the unit. These are to be attached to the base of the heater using the 4 self-tapping screws provided, taking care to ensure that they are located correctly in the bottom ends of the heater side mouldings.Specifics:Power Consumption: 750/1250/2000WVoltage: AC 220-240 VFrequency: 50HzNOTE: It is normal when the heaters are turned on for the first time or when they are turned on after having not been used for a long time the heaters may emit some smell and fumes. This will disappear when the heater has been on for a short while.Convector heater with thermostat - DL01S STANDChoose a suitable location for the heater, taking into account the safety instructions above.Insert the plug of the heater into a suitable socket.Turn the thermostat knob fully in a clockwise direction to the maximum setting.Turn on the heating elements using the rocker switches on the side panel. When the heating elements are on the switches will illuminate. For maximum heat output, both switches should be on.When the desired room temperature has been reached, the thermostat knob should be turned slowly anti-clockwise until thethermostatic heard to click off and the lights on the element switches are seen to go out. After this, the heater will keep the air temperature in the room at the set temperature by switching on and off automatically.CLEANING YOUR HEATERNote: When you switch on your heater for the first time, or when it is switched back on after it's not been used for a long period oftime, the heater may emit a smell and/or fumes, This is normal and they will disappear once the heater has been on for a shortperiod.CLEANING THE HEATER: Always unplug the heater from the wall socket andallow it to cool down before cleaning.STORING THE HEATER: When the heater is not going to be used for a long period, please store it in a clean dry place and free from dust, ideally in its original box. Clean the outside of the heater by wiping with a damp cloth and buffing with a dry cloth. Do not use any detergents or abrasives and do not allow any water to enter the heater.SAFETY INSTRUCTIONS (to be read before operating the heater)Do not use the heater unless the feet are correctly attached.Ensure the power supply to the socket into which the heater is plugged is by the rating label on the heater and thatthe socket is earthed.Keep the power cord away from the hot body of the heater.Warning: Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.Warning: To avoid overheating, do not cover the heater.Indoor use only.Do not place the heater on carpets having a very deep pile.Always ensure that the heater is placed on a firm level surface.Do not place the heater close to curtains or furniture to avoid a fire hazard.Warning: heater is not located immediately below a socket outlet.Do not insert any object through the heat outlet or air grilles of the heater.Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.Always unplug the heater when moving it from one location to another.Warning: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid a hazard.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or a lackof experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a personresponsible for their safety.Children should be supervised to ensure that they do not play with the appliance.Package includes: 1x GVC Convector Heater with Adjustable Thermostat 2KW