Handheld Spectrum Analyzer 2.8in Touch Screen Tiny Spectrum Analyzer K

£99.17
FREE Shipping

Handheld Spectrum Analyzer 2.8in Touch Screen Tiny Spectrum Analyzer K

  • Brand: Unbranded

Handheld Spectrum Analyzer 2.8in Touch Screen Tiny Spectrum Analyzer K

  • Brand: Unbranded
RRP: £125.27
Price: £99.17
You save: £26.10 (20%)
£99.17
FREE Shipping

In stock

We accept the following payment methods

Description

Specification:User interface:* Display resolution 320*240 pixels* Screen diagonal 2.8"* 16 bits per RGB pixels* Resistive touch control* Jog switch control* USB serial port control* Optional TTL USART port (SW not yet implemented) on the internal PCB* Linear power supply to avoid switching noise.*Add port ESD protection to upgrade versionV0.3.1_E)The input/output specification of the tinySA is split over the 4 modes:Low input mode spec:* Input frequency range from 100kHz to 350MHz* Input impedance 50 ohm when input attenuation set to 10dB or more.* Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps* Absolute maximum input level without attenuation of +10dBm* Absolute maximum input power with 30dB attenuation of +20dBm for short period* Input Intercept Point of third order modulation products (IIP3) with 0dB attenuation of +15dBm* 1dB compression point at +2dBm with 0dB attenuation* Power detector resolution of 0.5dB and linearity versus frequency of +/-1dB* Absolute power level accuracy after power level calibration of +/- 1dB* Lowest discernible signal using a resolution bandwidth of 30kHz of -102dBm* Frequency accuracy equal to the selected resolution bandwidth* Phase noise of -90dB/Hz at 100kHz offset and -115dB/Hz at 1MHz offset* Spur free dynamic range when using a 30kHz resolution bandwidth of 70dB* Manually selectable resolution filters of 3, 10, 30, 100, 300, 600kHz. Automatic selection of one of the 57 resolution filters.* On screen resolution of 145 or 290 measurement points.* Scanning speed of over 1000 points/second using largest resolution filters.* Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution bandwidth* Spur suppression option for assessing if certain signals are internally generated or actually present in the input signalHigh input mode spec:* Input frequency range from 240MHz to 960MHz* As there is no input bandfilter strong signals outside the 240MHz to 960MHz range can cause distortion of the in band signals* Absolute maximum input level without attenuation of +10dBm* Input Intercept Point of third order modulation products (IIP3) of -5dBm* 1dB compression point at -6dBm with 0dB attenuation* Power detector resolution of 0.5dB and linearity versus frequency of +/-1dB* Absolute power level accuracy after power level calibration of +/- 1dB* Lowest discernible signal using a resolution bandwidth of 30kHz of -115dBm* Frequency accuracy equal to the selected resolution bandwidth* Spur free dynamic range when using a 30kHz resolution bandwidth of 50dB* Selectable (automatic and manual) resolution filters of 3, 10, 30, 100, 300 and 600kHz* Optional 25dB to 40dB frequency dependent input attenuator. The power level error with this attenuator activated increases to +/- 15dB* On screen resolution of 145 or 290 measurement points.* Scanning speed of over 1000 points/second using largest resolution filters.* Automatic optimization of actual scanning points to ensure coverage of the whole scan range regardless of the chosen resolution bandwidthLow output mode spec:* Sinus output with harmonics below -40dB of fundamental* Output frequency range from 100kHz to 350MHz* Output level selectable in 1dB steps between -76dBm and -6dBm* Optional AM, narrow FM and wide FM modulation or slow sweep over selectable frequency spanHigh output mode spec:* Square wave output* Output frequency range from 240MHz to 960MHz* Output level selectable in variable increments between -38dBm and +13dBm* Optional narrow FM and wide FM modulation or slow sweep over selectable frequency spanReference generator spec:* Optional square wave output with fundamental at -25dBm connected to high input/output* Frequency can be set to 1MHz, 2MHz, 4MHz, 10MHz, 15MHz or 30MHz.Battery spec:* Charging time max 1 hour on 500mA minimum USB port or USB charger* Operation on fully charged battery for at least 2 hoursPackage inclued:TinySA 2.8" Spectrum analyzer *120cm sma-sma rg174 rf cabe *2USB Type-C Data Cable *1Hand rope *1SMA female to female connector *1SMA telescopic antenna *1
  • Fruugo ID: 115452261-433687208
  • EAN: 9478535807424

Product Safety Information

Please see the product safety information specific to this product outlined below

The following information is provided by the independent third-party retailer selling this product.

Product Safety Labels

CE Mark

Delivery & Returns

Guangzhou Niutuo Technology

Address: Panyu District, Guanghzou, 510430, China

Please see the compliance information specific to this product outlined below.

The following information is provided by the independent third-party retailer selling this product.

Manufacturer
The following information outlines the contact details for the manufacturer of the relevant product sold on Fruugo.

  • Ebeis(HK) co., Limited
  • Ebeis(HK) co., Limited
  • Flat/RM 185G/Fhang Wailnd Centre
  • No.6 Kin Tai ST, Tuen Mun, NT
  • Hongkong
  • HK
  • 999077
  • ebeishk@hotmail.com
  • https://retailer.fruugo.com/secure/compliance/gpsr

Responsible Person in the EU
The following information outlines the contact information for the responsible person in the EU. The responsible person is the designated economic operator based in the EU who is responsible for the compliance obligations relating to the relevant product sold into the European Union.

  • Yuan Li
  • Sea&Mew Consulting GmbH
  • Mittenhuber Stra?e 4
  • Neumarkt
  • DE
  • 92318
  • Compliance.EU@outlook.com
  • 4915224685061
  • https://retailer.fruugo.com/secure/compliance/gpsr