Product description:Polyurethane-based construction and assembly adhesive.Application:for: Spontaneously adhesive, high-strength, stable, fast-curing, resistant to ageing, weathering, water, chemicalsProperties: Very high initial adhesion and adhesive strength – extremely fast curingProfessional product from trade and industryNatural stone-compatible (does not cause discolouration)Optimally dosable, solvent-free and low-odourWeather- and age-resistant as well as resistant to water and many chemicalsStable – also suitable for vertical processingCan be sanded and paintedGlues almost all materialsInstructions for use:The processing temperature should be between +5 °C and +30 °C. The adhesive surfaces must be load-bearing, clean, dry, free of dust and grease. Remove any release agents that may be present. Depending on the material and surface finish, sand the adhesive surfaces in advance. When bonding non-absorbent materials together, it is recommended to lightly wet the adhesive or surface with water (10–20 g/m2). Apply the product evenly on one side, spread with a spatula if necessary. Assemble the pieces within 5 minutes of bonding. Fix the adhesive surfaces to prevent slipping. Do not use below +5 °C. Curing can be accelerated by spraying with water. Not suitable for bitumen and waxy surfaces, acrylic, PE, PP, PA, EPDM, PTFE and underwater bonding. We generally recommend test bonding for all applications In the event of improper handling, any liability for any damage expires.Manufacturer's ref.: H 200 110Package size: 310 ml cartridgeImportant information:Download "Safety Data Sheet" for this productLabelling according to Regulation (EC) No. 1272/2008 [CLP/GHS] Hazard Hazard statements:H315 - Causes skin irritation. H317 - May cause allergic skin reactions. H319 - Causes severe eye irritation. H334 - May cause allergy, asthma-like symptoms or difficulty breathing if inhaled. H335 - May irritate the respiratory tract. H351 - May cause cancer. Safety instructions:P101 - If medical advice is required, have packaging or label ready. P102 - Keep out of reach of children. P202 - Read and understand all safety instructions before use. P261 - Avoid inhalation of dust/smoke/gas/mist/vapour/aerosol. P280 - Wear protective gloves, eye protection. P285 - Wear respiratory protection in case of inadequate ventilation. P302 + P352 - IN CONTACT WITH SKIN: Wash with plenty of water/soap. P304 + P340 - ON INHALATION: Take the person out into the fresh air and ensure unobstructed breathing. P342 + P311 - If you have respiratory symptoms: POISON CONTROL CENTER/call a doctor. P305 + P351 + P338 - In case of contact with eyes: Rinse gently with water for a few minutes. Remove existing contact lenses if possible. Continue rinsing..