Streaming Accessories -HT25 Auto Ignition Probe Highlights Generic Brand HT25 Auto Ignition Probe Description: Auto Ignition Probe (P80), Probe length 2.5 meters, Attenuation up to 10000:1 Auto ignition probe is a kind of inductive capacitive sensor, it needs to match with an oscilloscope. The loot line has three ends, joint encounter oscilloscope for BNC use, clip for use, clip for upgrade. ground to select high voltage clip with. Close to use, can be used to test a secondary overlapping wave ignition overlap, overlapping wave parameters, thus achieved detection, diagnostic engine ignition position, vary the ignition voltage of each cylinder directly with the oscilloscope display. The loot line has three ends, a joint encounter oscilloscope for BNC use, a clip for use, a ground clip to choose the high voltage gleaned clip with.Loot clincher above is an attenuator, used to abut the high voltage icy clip with.Loot clincher on is an attenuator, used to attenuate the high pressure attenuation for low pressure, thus protecting the oscilloscope from electrifying impact. Specification: Notice (1) The test clips should not clip directly into the spark plug; they must be taken into the spark plug connection of the insulation wire, in order to avoid the breakdown and cause shock. (2) To keep the other high voltage away at least 2 inches, lest produce interference. (3) P80 main line length 2.5 meters, the decay of up to 10,000:1 Package includes: 1 piece automotive high voltage ignition probe