Item Type: Incubator Temperature Humidity Sensor Set_x000D_Material: Plastic_x000D_Size: Approx. 160 x 80 x 95mm / 6. 3 x 3. 1 x 3. 7in_x000D_Supply Voltage: 100-240VAC,50-60Hz_x000D_Sensor: A Temperature Sensor (2 Meters length), A Humidity Sensor (2 Meters length), Approx. 2m/6. 6ft_x000D_Setting Range: Humidity 10-80%RH, Temperature 1-65_x000D_Display Range: Humidity 0-99%RH, Temperature -9. 9-99. 9_x000D_Measurement Accuracy: Humidity 3% At 25, Temperature 1% At 25_x000D_Control Output: Seven Way (Main Heating, Auxiliary Heating, Lighting, Humidity Control, Right Egg, Left Egg, Fan) Control, Right Egg, Left Egg_x000D_Output Load: Main Heating 1500W, Auxiliary Heating 1500W, Lighting 100W, Humidity Control, Right Egg, Left Egg, Fan 1A/250VAC_x000D_Incubation Days: The Maximum Number Of Days Can Be Recorded 99 Days_x000D_Egg Turning Control: Egg Turning Cycle 1-999 Minutes Adjustable_x000D_Egg Turning Time: 0-999 Seconds Adjustable_x000D_Number Of Egg Turning: 0-999 Times Adjustable_x000D_Ventilation Control: Ventilation Cycle 1-999 Minutes Adjustable_x000D_Ventilation Time: 0-999 Seconds Adjustable_x000D_Lighting Control: Lighting Cycle 1-999 Minutes Adjustable_x000D_Lighting Time: 0-999 Minutes Adjustable_x000D_Working Environment: -10-45, Less Than 90%RH Without Condensation_x000D_Weight: Approx. 529g/19oz 1Set Contents: This incubator controller set contains 1 humidity sensor, 1 temperature sensor and 1 controller host. 2Temperature and Humidity Control: Incubator controller temperature and humidity sensor kit with temperature control, humidity control, restoring to factory settings. 3Multifunction: Incubator controller temperature and humidity sensor kit has LED light indication, exhaust timer control, alarm control, temperature and humidity calibration, incubation days setting, set function control parameters. 4Easy to Operate: The incubator controller temperature and humidity sensor kit also has lighting operation, egg turning control, switch operation, easy to operate and convenient to use. 5Wide Voltage: The incubator controller temperature and humidity sensor kit uses a wide voltage of 100?240V and can be connected to any incubation equipment for use.