Item Type: Coulombmeter_x000D_Model: VAC9610S_x000D_Material: ABS, PCB_x000D_Measurement range:_x000D_Voltage: 0.01-500v_x000D_Current: 0-1000A_x000D_Capacity: 0.001AH-65000AH_x000D_Energy: 0.00KWH-99999.9KWH_x000D_Time: 0-100 hours_x000D_Power value: 60KW_x000D_Temperature: 1-100 degrees Celsius_x000D_Accuracy:_x000D_Voltage: 1%_x000D_Current: 2%_x000D_Temperature: 2_x000D_Measurement rate: 20 times/second_x000D_Protection type and range_x000D_OVP (over voltage protection): 0.01-500v_x000D_LVP(under voltage protection): 0.01-500v_x000D_OCP(charge overcurrent protection): 0-1000A_x000D_NCP(Discharge overcurrent protection): 0-1000A_x000D_OTP(Over temperature protection): 0-100_x000D_Function introduction:_x000D_1, "BAT" battery capacity value setting, this parameter is to set the total measured battery capacity._x000D_2, "BPC" battery remaining capacity percentage, you can set the remaining AH of the battery according to this value._x000D_3, "OPP" set the over power protection value, if set the OPP value, when the actual output power value is greater than the set value, will prompt over power, and cut off the relay (self assigned)._x000D_4, "OVP" set the over voltage protection value, if set the OVP value, when the actual measured voltage value is greater than the set value, it will prompt over voltage, and cut off the relay (self contained)._x000D_5, "LVP" set the overvoltage protection value, if set the LVP value, when the actual measured voltage value is less than the set value, it will prompt the undervoltage, and cut off the relay (self assigned)._x000D_6, "NCP" set the overvoltage protection value, if the NCP value is set, when the actual measured charging current value is less than the set value, it will prompt overcurrent, and cut off the relay (self contained)._x000D_7, "OCP" set the overvoltage protection value, if the OCP value is set, when the actual measured discharge current value is less than the set value, it will prompt overcurrent, and cut off the relay (self assigned)._x000D_8, "OTP" set the over temperature protection value, if set the OTP value, when the actual measured temperature value is greater than the set value, will prompt over temperature, and cut off the relay (self assigned)._x000D_9, "ADS" communication address setting. Multi computer communication by setting the address to achieve multi computer communication._x000D_10, "TTL" instrument power on the default relay output state, normally open or normally closed._x000D_11, "CLR" no load current clear function, if the actual no load current is not 0, use this function to clear the no load current to 0. 1Bidirectional Detection of Current: Detection of charging and discharging users can easily detect bidirectional current without changing the wiring direction. Adopt high performance DC Hall sensor to collect current, safe, convenient and accurate. 2Power Failure Memory Function: After power failure, the ampere hours before power failure can be remembered, which is convenient for observation and measurement. The number of amp hours can be filled or cleared with one key, which does not affect the direct charging and discharging measurement. 3Comprehensive Display: Voltage, current, ampere hour, watt hour, time, power and temperature are displayed simultaneously, displaying comprehensive and clear information. With output shutdown function key, flexible to turn on or turn off the output. 4Multi Protection: With over voltage, over current, over power, under voltage protection and temperature control functions. It can be calibrated online, which is convenient for customers to correct the error in time. LCD screen can realize auto off and auto on to reduce product power consumption. 5Sound Alarm: The voltage and current waveform display function can be switched to observe the change curve of voltage and current more intuitively. Relay port can be switched to buzzer port to realize sound alarm function. 6Auto Correction: Under voltage capacity can be automatically cleared to 0, over voltage capacity can be automatically filled to facilitate long term cycling of customers, and auto correction error.1 x Display 1 x Hall Sensor 1 x Cable 1 x Terminal Cable