Item Type: Lidar Range Finder Sensor Material: ABS + Printed Circuit Board Function: Assist focusing, elevator projection, intrusion detection, material level measurement. Measuring Range: Approx. 0.2 ~ 8metre / 0.7 ~ 26.2ft (at 90% reflectivity) Accuracy: Approx. ±6cm / 2.4in at（0.2 ~ 3metre / 0.7 ~ 9.8ft）±2% at（3 ~ 8m / 9.8 ~ 26.2ft） Distance Resolution: Approx. 1cm / 0.4in Frame Rate: 100Hz Anti-Ambient Light Ability: 70Klx Working Temperature: -10℃~60℃ Light Source: VCSEL Centre Wavelength: 850nm Eye Safety: Class1 (IEC60825) Field of View: 2 Degree Power Supply Voltage: 5V±0.1V Average Current: ≤70mA Power Consumption: ≤0.35W Peak Current: 150mA Communication Level: LVTTL (3.3V) Communication Interface: UART / I2C Size: Approx. 35 x 21.25 x 13.5mm / 1.4 x 0.8 x 0.5in Storage Temperature: -20℃~75℃ 1、A single?point ranging radar based on the ToF principle, using 850nm infrared light source, ensures stable, accurate and highly sensitive distance measurement. 2、Has multiple built?in adaptation algorithms for various application environments and targets, and opens a variety of adjustable configurations and parameters. 3、Guarantees excellent ranging performance in complex environments and meet the needs of customers in complex application scenarios, efficient and practical. 4、Can be flexibly applied in varied cirmustances, including but not limited to assist focusing, elevator projection, intrusion detection, material level measurement, etc. 5、Enables a wide measuring range from 0.2 metre to 8 metre, compatible with for Pixhawk and for Raspberry Pi, and has UART/I2C communication interface as well. 1 x Lidar Range Finder Sensor 1 x Connecting Cable The module has UART and I2C interface, UART is the default, if you need to use I2C interface, please set it yourself.