Primarily used for bonding various dental orthodontic accessories. Easy to use with minimal waste and suitable for independent operation. Offers high clinical bond strength for efficient and convenient use. A complete accessory kit featuring a new-generation enamel adhesive resin. Two different set types are available to choose from based on requirements. Condition: New Item Type: Orthodontic Dental Adhesive Optional Type: Large Set, Small Set Material: Plastic Service Life: 18 Months Storage Condition: Keep below 25 degrees (do not freeze) Suitable for: All kinds of dental orthodontic attachment adhesion Main Technical Performance Index: Curing time not more than 3000 seconds. Adhesive shear strength MPa greater than 17.2. Usage: Tooth preparation involves cleaning the enamel surface to remove dirt. Rinse the teeth thoroughly with water, isolate them, and blow dry the surface with an oil-free and moisture-free air gun. Apply the acid-etching agent to the tooth surface for 50-60 seconds, rinse thoroughly with water, and blow dry; the surface should appear chalky. If not, prolong the acid etching time. Use a bristle brush to apply a thin layer of liquid to the etched tooth surface and to the bonding surface of the brackets. Apply a small amount of paste with the mixing rod to the adhesive surface of the grooves coated with liquid to form a thin layer. Immediately attach the bracket to the tooth surface. Adjust the bracket position within 20 seconds and press slightly for 5-10 seconds to prevent sliding. Remove excess liquid and paste after 40-60 seconds. Orthodontic operation can be performed after curing for 5 minutes. Package List: 3 x Paste 3.5g, 1 x Etching Agent 2.5ml, 1 x Liquid Agent 8ml, 20 x Brush Head, 1 x Needles, 3 x Mixing Pen. .