Features: The three-dimensional photoelectric edge probe is a product with high-precision edge measurement and other functions. It has the following advantages: higher alignment accuracy, repeatability up to 0.001MM; more comprehensive Z-axis measurement; probe, better accuracy retention; greater probe oscillation to prevent probe damage caused by errors; no need to use the conductive principle, and measurement will not be impossible due to non-conductive materials or machine tool spindles. Applicable range Metal Bakelite Plastic Measurement accuracy 0.001 Repeat positioning accuracy 0.001 Specifications: Part name: 3D photoelectric edge finder Model: MMP25 Material: stainless steel Color: as shown Size: as shown Measurement accuracy: 0.001mm Repeat positioning accuracy: 0.001mm Probe direction:XY+Z Probe safety: XY15, Z+5mm Power supply: 14250 lithium battery 3.6V Trigger life: 5,000,000 times Scope of use: metal, bakelite, wood, plastic, etc. Usage: How to use 3D photoelectric edge probe According to the position of the workpiece to be measured, move the probe to the workpiece position and approach the workpiece in a step-by-step approach. Package content: A: 1*probe(just the probe) Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. B: 1*MMP25 edge finder _x000D_