1、2 WORKING MODES: In PIR motion sensor mode, the LED lights up when movement is detected, and automatically turns off if not detected within 15 seconds. In constant light mode, the light is turned on and off. 2、EASY INSTALLATION: Remove the adhesive tape from the bracket and stick it to any flat surfaces. Then, place the magnetic suction lamp on the bracket, which can be easily removed without screws. 3、POWER SUPPLY: This LED induction light has built in 1000mAh rechargeable battery and equipped with a USB data cable for charging, making it easy to use anytime and anywhere. 4、LIGHTING TIME: After being fully charged (blue light), it can be induced to light up 5-8 times a day, can be used continuously for 2 months. It can light up for more than 5 hours in the constant light mode. 5、WIDE APPLICATION: This LED sensing light strip is suitable for placement in bedrooms, closets, cabinets, workshops, garages, staircases, corridors, storage rooms, etc, convenient and practical. Item Type: LED Induction Light Sensing Method: Human Infrared Sensing Sensing Control: Built in Light Sensor Induction: 10ft/120° Number of LED: 39pcs Sensing Angle: 120 Degree LED Lifespan: Over 80000 hours LED Brightness: 90LM Light Color: Warm Light Battery: 1 x 1000mAh rechargeable battery (built in battery) Battery Usage: Charging and discharging more than 500 times Battery Full Charging Usage Frequency: >600 times Induction On Time: 15 seconds Lamp Operating Temperature: -10-50℃ Size: Approx. 235 x 40 x 9.5mm / 9.3 x 1.6 x 0.4in 1 x Induction Light 1 x USB Cable 2 x Brackets with Sticker Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.