Precautions     IMPORTANT     Do not plug in an appliance where the load exceeds 10AMP Always ensure the plug of any     applance is fully inserted into the timer outlet. If cleaning of the timer is required, remove     from mains power and wipe timer with a dry cloth     DO NOT IMMERSE TIMER IN WATER OR ANY OTHER LIQUID Heaters and similar     appliances should never be left unattended during operation. The manufacturer recommends     such apliances not be connected to timers    specification:    BRIEF INTRODUCTION     I The timer has a total of 16 ON/OFF programs     2. Manual on/auto/manual off can make settings as required very easily     3. 15 combinations of day or blocks of days are available for the timer as follow     MO TU WE TH. FRSA. SU     MO     TU     WE     TH     FR     SA     SU     MO WEFR     TUTH.SA     SA.SU     MO TU. WE     THFR.SA     MOTU WE TH.FR     MOTU WETH.FRSA    Application range:  1. Wetting and rust removal  2. Air humidification  3. Chemical treatment  4. Chemical spraying  5. Liquid spraying  6. Tobacco leaf humidification  7. Tablet coating  8. Flue gas evaporative cooling  9. Disinfection  10. Unit cooling  11. Fruit wax spray  12. Ceramic tile glazing  13. Factory humidification  14. Salt fog test  15. Artificial fog  16. Humidification in other places    INITIAL OPERATION     1. Plug the timer into a regular 220-240 Volt housrhold power point and turn the     power on..     2. Leave for approximately 12 hours to charge the memory back up batteries     3. After charging clear all current information by pressing the"R button with a sharp     object such as a pen or pencil.     4. The timer is now ready to be set up for ise     SETTING CURRENT TIME     1. Press the CLOCK button and hold simultaneously press the week button until     actual day is displayed. Continue by pressing HOUR or MINUTE button until th o     current hour or minute is displayed. When setting the buttons week hour or minute can     be held down for rapid forward counting     oth buttons. The week and time will be     elease Do     2. Re     e set     3. To reset incorrect time repeat previous steps    Notes:  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you  2. Please allow 1-3cm measuring deviation due to manual measurement.