Auto detection of K-Line/CAN with option to bypass and force preferred communication protocol. Temporary immobilizer bypass for bench flashing on ME7 systems. Boot mode support for ECUs with C167 and ST10 processors. EEprom read/write functions available for select ECUs. TPROT level checking for MEDC17 without ECU disassembly. 1. Install on Windows 7 system. 2. Proper driver installation required before software use; software will not open otherwise. Use only the driver provided on the included CD—do not use drivers for other MPPS versions. This module enables advanced functions for a range of ECUs including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delco, Trionic, and others. Supported models: - 6JF: Full Read/Write micro-type and EEprom via K-line - 8DF: Full Read/Write micro-type and EEprom via K-line - 8F2: Full Read/Write micro-type and EEprom via K-line and CAN - 8F3: Full Read/Write micro-type and EEprom via K-line and CAN - 8GM: Full Read/Write micro-type and EEprom via CAN - 8GS: Full Read/Write micro-type and EEprom via CAN - 5SF3: Full Read/Write Flash and EEprom via CAN - 5SF3: Full Read/Write EEprom via K-Line - 5SF8: Full Read/Write Flash and EEprom via K-line and CAN - 5SF9: Full Read/Write Flash and EEprom via CAN Material: ABS plastic Color: Black Package Contents: 1 x MPPS V18.12.3.8 1 x Breakout Tricore Cable 1 x Connection Cable 1 x CD Only the items listed are included. Note: Lighting and display differences may cause slight color variations between image and actual product. Measurement may vary by +/- 1-3 cm.