Specification: Function: Sensor , flow rate control Flow rate (test by oil high density liquid) : 30-3000L/Hour Flow Pulse: F(Hz)=1.2ML/ P +/-1% Working Voltage:DC 7V~24V not less than 5Vdc Working Load Capacity: =10 mA (DC 5 V) Operate pressure : Less than 1.2Mpa Operating Working Temperature : -25 Degree centigrade to +70 Degree centigrade Liquid Temperature: 70 Accuracy : at 30-3000L/hour is +/-1%, test liquid is . Working environmental : liquid, light oil, .... Cable wire : Red : + IN , Black :- GND , Yellow : signal output. Color: As Shown Material: plastic Package Contents: 1 x Gear flow meter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.