Feature: 1. Time and money saving equipment, easy to read and convenient to operate. 2. Allows adjustment to maintain correct wheel alignment and even tyre wear. 3. Magnetic gauge attaches to the hub or disc brake. 4. With a simple leveling adjustment from -5 degrees to 5 degrees. 5. Applicable to accurate checking of the castor and camber angle. 6. Measures the camber and caster angle on the wheel hub or brake disc. Specification: Condition: 100% Brand New Item Type: Camber Castor Alignment Material: Aluminum + Quick-silver Color: As picture shown Description: This adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Instructions for Use: 1. Remove the four-wheel positioning sensor (fixture), remove the tire. 2. Carefully suck the magnetic gauge tool on the side of the brake wheel. 3. Adjust the gauge tool to 0. 4. Installed the required positioning special parts. 5. Use special tool, with the help of magnetic gauge tool's degree instruction to adjust the positioning parts to the required measurement angle. 6. If there is a little deviation when re-test with the positioning tool, just fine-tune at the bottom of the car. (Generally a little deviation does not cause positioning failure). . Package List: 1 x Camber Castor Alignment