Cutting Modular Cable: 1. Place the single-bladed side of the tool’s cutter facing you and cut the modular cable to the desired length. Ensure the ends are cut straight across, not diagonally. Stripping Modular Cable (Flat Cable): 2a. Insert a 6P cable into the two-bladed side of the tool’s stripper until it reaches the stop guide. 2b. Insert an 8P cable into the two-bladed side of the tool’s stripper, allowing it to extend slightly past the lower cutting blade. 3. Squeeze the handles until they stop; ensure the cable is perpendicular to the tool, then pull the cable away. 4. Remove the outer jacket, insert the stripped cable into the plug, and align the wires correctly (e.g., T568A or T568B standard). 5. Place the modular plug with the cable into the tool’s holder. Ensure the stripped wires are properly positioned between the crimping tab and contact points. Squeeze the handles until they stop. 6. Remove the crimped plug from the tool. Portable design with ergonomic shape. Features a ratchet mechanism for consistent, high-efficiency crimping. Compatible with 8P/8C (RJ45) connectors. Color: Blue + Black Material: Steel + Plastic Package Includes: 1 x 8P8C/RJ45 Network Cable Crimper Tool 1 x Instruction Manual